In short: An A4 sheet holds 10 business cards of 85 × 55 mm when they butt up against each other; with crop marks and full bleed between the cards it’s 9. On US Letter it works the same way with 3.5 × 2 in cards. Snuglay works out both options automatically and saves the sheet as a print-ready PDF – free, no account, no upload.
How many business cards fit on one sheet?
It depends less on the paper than on how the cards will be cut. For a card of 85 × 55 mm with 3 mm (⅛ in) bleed on A4, Snuglay arrives at:
Schematic. Values from Snuglay: Auto mode, A4 portrait, 5 mm margin without and 8 mm with crop marks. Switch Snuglay to inches for US Letter and Legal.
Why bleed changes the count
If your card runs to the edge – a background colour, a photo, a stripe – it needs bleed all round: colour that extends 2–3 mm (about ⅛ in) beyond the final cut. No cutter hits the line to a tenth of a millimetre; without bleed, the slightest shift leaves a white sliver.
When two cards sit right next to each other, there’s no room for that bleed. So there are two clean ways to do it:
- Double cut: leave a gap of twice the bleed between cards (6 mm for 3 mm bleed). Every card is cut on all four sides – the safe choice for designs that bleed off the edge, at the cost of space.
- Single cut: the cards butt up and one cut separates them. This only works if the design doesn’t run to the inner edges – otherwise a strip of the neighbouring card ends up on yours.
Snuglay can’t see what your design looks like, so single cut is an option you switch on deliberately.
How to do it in Snuglay
- Open your card: a finished PDF with bleed (from InDesign, Affinity, Canva “PDF Print” …), a JPG/PNG, or – with one click – straight from LaydoStudio.
- Pick the sheet: A4/A3 or Letter/Legal, portrait or landscape – or a custom size such as 12 × 18 in or SRA3 for a print shop.
- Let it arrange: “Auto” tries 0° and 90° and keeps whichever fits more cards. “Manual” lets you set margin, gap and rotation yourself.
- Crop marks: on or off; with crop marks, pick “single cut” if your design allows it.
- Save the PDF: Snuglay writes a print-ready PDF with an embedded colour profile – right on your device.
A whole team on one sheet
If your PDF has several pages – say one business card per team member – Snuglay cycles through them across the sheet (1, 2, 3, 1, 2, 3 …). With LaydoStudio Pro, such a series comes from a list of names and goes to Snuglay with one click.
Print at home or at a print shop?
- On your own printer: office printers usually leave a few millimetres unprinted at the edge – Snuglay’s default margin of 5 mm (8 mm with crop marks) allows for that. Check your printer’s manual for the heaviest paper it takes, and cut along the crop marks with a guillotine or rotary trimmer.
- At a print shop: many shops want the single card and do the imposition themselves. For digital printing on your own sheet size, or to trim the cards yourself, a finished sheet is exactly right – ask for the sheet size.
Micro-perforated business card sheets aren’t built in as ready-made layouts. Enter the sheet size as a custom format and copy margin and gap from the manufacturer’s spec in “Manual” mode. Ready-made layouts exist for label sheets: print a PDF on a label sheet.