Use case · Roll & wide format

Labels on a roll: how much length for your quantity?

For stickers, decals or labels in wide format, what counts isn’t the sheet but the roll length. Snuglay works out the length from roll width and quantity – rounded up to whole metres if you like – and lays out the pieces print-ready.

In short: In “Roll” mode you enter the roll width and the quantity you need. Snuglay works out how many pieces fit across, how many rows it takes and how long the run gets – and creates a PDF at exactly that length, with or without crop marks.

How Snuglay calculates the length

The maths is simple, but it gets fiddly once margins, gaps and rotation come in:

  1. Pieces per row = how many trim sizes plus gaps fit between the two side margins.
  2. Rows = quantity ÷ pieces per row, rounded up.
  3. Length = top margin + bottom margin + rows × piece height + gaps between rows.

Worked example (no rotation): roll width 1,370 mm (54 in), sticker 50 × 50 mm, 3 mm gap, 10 mm margin. 25 stickers fit across (25 × 50 + 24 × 3 = 1,322 mm). 1,000 pieces need 40 rows, so the run is 20 + 40 × 50 + 39 × 3 = 2,137 mm long. Rounded up to whole metres: 3,000 mm.

In “Auto” mode Snuglay also tries the piece rotated by 90° and keeps whichever fits more per row. Switch to inches and it all works in inches.

Round up to whole metres

Many shops cut rolls in whole metres or fixed sections. With “Round length up to a fixed division”, Snuglay rounds the run up to the next multiple – say 1,000 mm. Only the rows you ordered are printed; the rest stays empty instead of being filled by accident.

Bleed and crop marks on a roll

How it works

  1. Open your design: PDF, JPG/PNG or one click from LaydoStudio.
  2. Choose “Roll” and enter the usable width of your material.
  3. Enter the quantity and switch on the division if you need it.
  4. Arrangement: leave it on Auto, or set margin, gap and rotation manually.
  5. Save the PDF – at exactly the calculated length, with an embedded colour profile.

Several designs in one job? Snuglay cycles through the pages of a multi-page PDF; the quantity is raised to at least the page count.

Frequently asked questions

Q01How do I calculate the roll length for a quantity?+

Work out pieces per row from roll width, margin and gap, divide the quantity by it and round up, then add rows × piece height, the gaps, and top and bottom margins. Snuglay does this automatically and shows the length instantly.

Q02Can Snuglay round up to whole metres?+

Yes. “Round length up to a fixed division” rounds the run up to the next multiple of a division length, e.g. 1,000 mm. Only the ordered quantity is printed.

Q03Which roll width do I enter?+

The printable width – material width minus whatever your printer can’t print at the edges. The margin for the cutter is set separately in Snuglay.

Q04Are stickers on a roll nested by their contour?+

On rolls Snuglay currently arranges pieces in a grid. Nesting by real shape (True Shape) is available for fixed sheets.

Q05Is roll mode free?+

Yes – like sheets and True Shape, it’s part of the free version, with no account and no upload.

Quantity in, length out

Enter roll width and quantity – Snuglay calculates and builds the PDF. No account, nothing is uploaded.

Start the app →